![]() When the bracket is level, you can tighten the screws all the way. You can use a spirit level that’s included in the box or your own personal spirit level. Ensure the bracket is level before tightening any of the screws. You can now place your mounting bracket on the wall and start to tighten the screws to about three-quarters of the way in. The recommended sizes are usually mentioned in the fitting instructions, so stick to these sizes. Be aware that these holes shouldn’t be thicker than the plug. Once you’ve finished drilling the pilot holes, you need to drill the actual holes. These holes ought to be slightly smaller than the bolts you’ll be using. Next, drill the pilot holes into the wall. Use your tape measure to find out the recommended height for your TV to be at eye level from where ever it’s being viewed from. Or, even better, attach the drilling guide to the wall with a little masking tape and drill through it. Most brackets come complete with a wall-drilling guide, so use this to mark out the drilling holes with a pencil directly on the wall. The wall fittings will include the recommended screws and wall plugs for a brick wall, and you should not deviate from using these. TV mounting brackets are usually sold as a kit, which includes the actual bracket, instructions, and all of the fittings that you will need to attach the bracket to the wall, and the TV to the bracket. This means that a bracket will likely fit your TV, but check before you buy. TV’s which are larger than this usually require flat, static brackets which only allow for a few degrees of tilt and no positional change.įlat-screen TV’s have fittings on the back of them that comply to Video Electronics Standards Association (VESA) standards in the form of a series of holes set in a particular pattern and at set distances, and conforming to similar holes in brackets. Generally, flat-screen TV’s up to a size of 47” can be fitted to an arm-type bracket which allows for a great deal of movement of the TV as well as tilt and swing. You will need to find a suitable bracket for your TV. It is possible to flat-mount a smaller TV onto a plasterboard wall by using the right fixings, but this is not recommended, and this article will detail the work required to mount a TV to a solid brick wall. You will need to drill into a brick or stone-based wall in order to securely fix the TV mount. An electric drill with a series of masonry bits.Screws and suitable wall plugs – these are usually supplied with your chosen TV bracket assembly.A spirit level, to ensure that your TV is mounted straight and squarely.A screwdriver set – you may need a slotted set as well as the Philips cross-head type.In order to hang a TV from a wall, you will need a number of tools and items. brick, plaster, stone.), and how long it takes an installer to complete. This price range can change depending on what type of installation is needed, what type of material the wall is made from (e.g. The average cost to hang a TV is between £50-£120. It will also review any problems and pitfalls that may occur while mounting a TV in such a way.Ĭosts involved with hanging a TV on the wall Note : It is always recommended to check the local building codes and regulations before starting any construction, and consult with a professional if you are unsure about any steps in the process.This article will outline the work needed to mount a TV to a wall, by using a number of different fittings and brackets. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |